T.C. 285   
CONTACT    PRODUCT INFORMATION    REQUEST INFO    TRADE SHOWS   
MISSION STATEMENT    HOME   

 

CitriSolv
MSDS   
T.C. 285

WHERE TO USE

  • Engine degreasing
  • Cosmoline removal
  • Adhesive removal
  • Aviation repair facilities
  • Dip cleaning of tools & parts
  • Rubber tire marks
  • Printing presses

PROPERTIES

Fragrance Citrus
pH at 10% dilution with H2O 8.9
Color Colorless
Water rinseable Yes
For non-conductive cleaning No
Residue Trace
Flash point [undiluted] T.C.C. Flash point is over 145 ° F / not a hazardous waste
Flash point [diluted with H2O] None
Evaporation rate Good
Density 0.803
Corrosion to metals None
Hazardous ingredients as identified by the EPA Code of Federal Regulations Section 261.31 None
Solvency Good
Safety on Painted Surfaces Good

SAFETY

Keep out of reach of children. Product is for industrial and institutional use only by trained personnel. Material Safety Data Sheet available.

CAUTION: Contains petroleum distillates. Do not take internally. Harmful if swallowed. Avoid skin and eye contact. Keep away from heat, sparks and fire.

FIRST AID: In case of contact, flush eyes and/or skin with water. If swallowed, do not induce vomiting. Get medical attention immediately.

DIRECTIONS FOR USE

Although this product is safe to use on most surfaces, be sure to pre-test before using.

Dip cleaning: Dip part into solvent. Allow to soak until grease and foreign matter are loosened. Remove and dry.

Parts washers: Spray parts completely with solvent, brush parts and repeat. Spray to rinse.

Spray cleaning: Spray solvent on parts and motors using a coarse, heavy spray. Wipe or allow to air dry.

AUTHORIZATION

Authorized by the USDA for use in federally inspected meat and poultry plants and Classification C-1 for use on all surfaces in inedible product processing areas.

9/2000