|
|
 |
| Liquid Iron Phosphate : Three- or Five-Stage Washer and Soak Tanks |
|
|
 |
|
| T.C. 625-LW |
- Contains effective biodegradable surfactants
- Effectively removes soils, oils and other contaminates
- Deposits a high quality iron phosphate coating
- Contains an ingredient that keeps sludge and scale build-up to a minimum
- Greatly reduces scale build-up inside and outside of risers and washer interior
- Operation continues over an extended period of time, without purging or descaling of washer
| Liquid Iron Phosphate for Three or Five Stage Washer |
|
|
|
|
| T.C. 650 |
- Blend of highly effective biodegradable surfactants that effectively remove soils, oils and other contaminants.
- Upon cleaning, deposits a high quality iron phosphate coating.
- Minimal sludge and scale build-up in risers and washer interiors.
|
|
| T.C. 655 |
- Somewhat syrupy, light green liquid
- A clear material that is miscible with water in all proportions
- No foaming tendency and no fire hazard
- Designed to produce heavy, dense crystalline zinc phosphate coatings on iron and steel parts
- Applicable by tank immersion operations to generate coatings in excess of 1000 mg. Per square foot
- The heavily coated surfaces are useful for rust prevention
- Is an absorbing base for corrosion-preventive oils, stains and waxes
- The coating possesses many fine pores which can soak up lubricants that act as heavy drawing aids
|
|
| T.C. 657 |
- Provides uniform zinc phosphate
- Applied through immersion or spray
- Produces a microcrystaline lattice
- Provides a rugged layer of crystals
- Absorbs less paint of powder
- Yields higher gloss to finish
- Meets TTC-490-B Type 1, Type 3 and QQP-416-C specifications
|
|
| T.C. 687 |
- Designed specifically for steam gun or tank applications.
- Cleans and conditions ferrous metals by removing oils, shop oils, smuts, etc.
- Develops a conversion coating that improves corrosion resistance and paint adhesion.
- Solution has a longer working life and less maintenance due to the minimum of sludge build-up.
|
|
| T.C. 1890 |
- Organic coating system for prevention of white rust and storage corrosion on zinc alloys.
- Provides surfaces with anti-fingerprint characteristics.
- Improves performance in roll forming.
- Designed for use on continuous galvanizing lines.
|
|
|
