T.C. 214-WI   
CONTACT    PRODUCT INFORMATION    REQUEST INFO    TRADE SHOWS   
MISSION STATEMENT    HOME   

CitruSolv Degreaser
TECH BULETTIN [PDF]    MSDS   
T.C. 214-WI

WHERE TO USE

  • In dip tanks for degreasing parts and components
  • For spray cleaning electric motors
  • In parts' washers for cleaning and degreasing tools, dies and other metal parts

PROPERTIES

FragranceCitrus
pH at 10% dilution with H2ON/A
ColorColorless
Water rinseableNo
For non-conductive cleaningYes
ResidueNone
Flash point (undiluted) T.C.C.Flash point is over 145oF/not a hazardous waste
Flash point (diluted with H2O)N/A
Dielectric constantGreater than 25,000 volts
Evaporation rateFast
Density0.78
Corrosion to metalsNone
Hazardous ingredients as identified by the EPA Code of Federal Regulations Section 261.31None
SolvencyGood

SAFETY

Keep out of reach of children. Should be used for industrial and institutional use only by trained personnel. Material Safety Data Sheet is available.

CAUTION

Contains petroleum distillates. Do not take internally. Harmful if swallowed. Avoid skin and eye contact. Keep away from heat, sparks and fire.

FIRST AID

In case of contact, flush eyes and/or skin with water. If swallowed, do not induce vomiting. Get medical attention immediately.

DIRECTIONS FOR USE

Although this product will not harm most plastics and painted surfaces, be sure to pre-test before using.

Dip cleaning: Dip part into solvent. Allow to soak until grease and foreign matter are loosened. Remove and dry.

Parts' washers: Spray parts completely with solvent. Brush parts and repeat. Spray to rinse.

Spray cleaning: Spray solvent on parts and motors using a coarse, heavy spray. Wipe or allow to air dry.

AUTHORIZATION

Authorized by the USDA for use in federally inspected meat and poultry plants and by Classification C-1 for use on all surfaces in inedible product processing areas.

6/2000